Back to "Series Circuits" Chapter 3
Series Circuit JAVA Troubleshooting Simulation #1
In the circuit below use the "No Fault" condition as a base line to determine which resistor has failed or changed value in each faulty circuit( Fault 1 thru Fault 4.) Then check your result by clicking "Answer" at bottom of page and compare resistor values with those given with schematic.
Also try more difficult Simulations #2, #3, and #4 .
Vs = 10.0 Vdc Rs =
R1 = R2 = R3 = R4 = 1.00 ohm